Catalog
Search   Back to Catalog

BRK DICON 680MRL Mains Powered Interconnectable Heat Alarm

29.15
Discontinued Product
Request Info
BRK DICON 680MRL Mains Powered Interconnectable Heat AlarmWith Tamperproof Rechargeable Lithium Battery Cells Backup.
The Dicon 680MRL 230 volt Heat Alarm with rechargeable lithium battery back up is designed for use in the kitchen.
The 10 year rechargeable battery back up provides power to the unitin the event of a mains failure.
Incorporating a thermistor heat sensing element for accuracy and reliability.
The 680MRL can be linked with up to 11 compatible smoke and heat alarms,providing additional protection.


Features
  • 230 Volt Mains Powered
  • Backup with tamper-proof rechargeable lithium cells*
  • Test Button
  • Accurate Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • Mounting Base Plate
  • 5 Year Guarantee
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions: 134mm dia x 57mm
*Lithium cells give reliable back up for at least six months of power out in standby mode.Back up cells have a 10 year life and are environment friendly

Technical Specifications

Sensor........................................Thermistor
Sensing range.......................... 54C to 70C
Voltage........................................230 volt AC 50-60Hz
Lithium Battery Back up...............1 month standby
Interlink.........................................Up to 12 alarmsAlarm
Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, horn
Indicator Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red


Download or view Data Sheet


Please note that if this heat alarm is being purchased to replace an existing BRK alarm, then the existing electrical connector will need to be replaced with the new connector supplied with the alarm - three wires.Also the existing mounting plate will need to be replaced with the new one supplied with the alarm - just two screws.The new mounting plate will fit the existing pattress (SMK623A) if fitted.