Err

YourHomeDirect Shop
Search Your Cart
1.50
BRK 86RACE & 2002RACE Laser Cut Adapter Plate for BRK 7010BENEW - May 2020




This precision laser cut 3mm thick plastic adapter plate can be used to fit the BRK 7010BE Photoelectric Smoke Alarm as a replacement for the discontinued BRK 86RACE Ionisation Smoke Alarm & BRK 2002RACE Photoelectric Smoke Alarm (all variants).

It can be used to replace the old alarm fixing plates whether they are fitted directly to the ceiling or are fitted into a pattress base (SMK839).

Please see the slideshows of how to do this using the links below.





The first slideshow of images shows how to do this when the existing alarms are fitted directly by a fixing plate to the ceiling.

The second slideshow of images shows how to do this when the existing alarms are fitted by a fixing plate inside a pattress base (SMK839).

Please note this item is available at extra cost when purchased with the BRK 7010BE Photoelectric Smoke Alarm only and will not be supplied separately (except for existing customers).

The plate has removable protective film on both faces.


SLIDESHOW -  FOR ALARMS FITTED WITHOUT PATTRESS BASE

SLIDESHOW - FOR ALARMS FITTED WITH PATTRESS BASE
Discontinued Product
18.60
BRK SMK839RCB Smoke Alarm Relay Base/PattressIf remote signalling is required, a relay version of the surface mounting pattress (SMK839) should be used.

This has volt free contacts and is installed in a similar way to the standard pattress.

For use with the BRK 86 range and BRK 2002 range.

Even though this item has been discontinued, we still have stock.
In Stock
15.00
Bell System 801 Additional Door Entry / Security Telephone HandsetSPECIAL OFFER NEW LOW PRICE - ONLY SIX LEFT IN STOCK

Additional or replacement handset for use with the Bell System 901 door entry system.

Up to ten handsets can be used on each door system.
OUT OF STOCK
11.88
BRK DICON SA410AP Battery operated 3V Smoke Alarm with "Alarm Pause" Feature.
Features
  • New miniature design
  • Photoelectric sensing technology
  • Battery operated
  • Alarm Pause feature
  • Low battery warning
  • Replaceable AAA batteries
  • Loud 85dB alarm
  • Instant test feature
  • 5 year comprehensive warranty
  • BS EN 14604 - Licence Number: KM99052
Technical Specifications

Detection Method.....................Photoelectric sensing technology
Sensitivity................................Test sensitivity, circuits and horn
Dimensions..............................37mm(h) x 86mm (dia)
Battery....................................At least one year under normal conditions
Recommended Operating
Temperature Range................5C to 38C
Alarm Sound Level..................85dB at 3m

In Stock
18.17
BRK DICON SA410LLI Interlinkable Photoelectric Smoke Alarm with "Alarm Pause" & Lithium BatteryNOW BACK IN STOCK WEEK COMMENCING 2nd MARCH 2020


The SA410LLi represents a new generation in photoelectric smoke alarms.
Advanced microprocessor controlled detection and optimum sensing chamber design combine with the added benefit of an alarm pause feature to provide enhanced resistance to nuisance alarms from sources such as cooking fumes.
Also includes interlink capabilities - Can link up to 12 units at a time.
The alarm is automatically activated during installation and is powered by a non removable long life battery that will comfortably power the alarm well beyond its 10 year replacement date.
The attractive miniature styling adds aesthetic appeal.
Features
  • Interlinkable - Links up to 12 alarms
  • New miniature design
  • Photoelectric sensing technology
  • Long Life Sealed in Lithium Battery
  • Alarm Pause feature
  • Loud 85dB alarm
  • Instant test feature
  • 10 year comprehensive warranty
  • BS EN 14604
Technical Specifications

Detection Method.....................Photoelectric sensing technology
Dimensions..............................37mm(h) x 86mm (dia)
Battery....................................At least ten years under normal conditions
Recommended Operating
Temperature Range................5C to 38C
Alarm Sound Level..................85dB at 3m

28.10
Newlec NL3620N Mains Powered Carbon Monoxide (CO) Detector Alarm (BRK CO850Mi)PLEASE NOTE.
The Newlec NL3620N is actually the CO850Mi manufactured by BRK
If a NL3620N is ordered we will send out a BRK CO850Mi which will fit the existing fittings of the NL3620N.

  • Detects harmful levels of carbon monoxide (CO)
  • Fully automatic sensor test
  • Instant test/reset button
  • Loud 85db alarm
  • BSEN50291:2001
  • Interlink up to 18 CO alarms
  • 5 year guarantee

39.64
Newlec NL3624N Mains Powered Carbon Monoxide (CO) Detector Alarm (BRK CO850MBXi) with Battery BackupPLEASE NOTE.
The Newlec NL3624N is actually the CO850MBXi manufactured by BRK
If a NL3624N is ordered we will send out a BRK CO850MBXi which will fit the existing fittings of the NL3624N.

  • Detects harmful levels of carbon monoxide (CO)
  • Fully automatic sensor test
  • Instant test/reset button
  • Loud 85db alarm
  • BSEN50291:2001
  • Interlink up to 18 CO alarms
  • 5 year guarantee
28.10
BRK DICON CO850Mi Mains Powered Carbon Monoxide (CO) Detector Alarm
  • Detects harmful levels of Carbon Monoxide
  • Instant test / reset button
  • LED indicator lights
  • Loud 85db alarm
  • Complete with pattress therefore does not require a junction box.
  • This unit is designed to be permanently connected to the mains and can be interlinked to 17 other CO alarms (18 in total).
  • Full installation instructions and user manual included.
  • Dimensions: (W x H x D approx.) 70 x 130 x 60 mm

39.64
BRK DICON CO850MBXi Mains Powered Carbon Monoxide (CO) Detector Alarm With Alkaline Battery Backup
  • Detects harmful levels of Carbon Monoxide
  • Instant test / reset button
  • LED indicator lights
  • Loud 85db alarm
  • Complete with pattress therefore does not require a junction box.
  • Alkaline battery included
  • This unit is designed to be permanently connected to the mains and can be interlinked to 17 other CO alarms (18 in total).
  • Full installation instructions and user manual included.
  • Dimensions: (W x H x D approx.) 70 x 130 x 60 mm
OUT OF STOCK
6.14
Newlec NL3630 Battery Powered Ionisation Smoke Alarm
  • 5 Year Warranty
  • BS5446-1:2000
14.54
Newlec NL3631 Mains Powered Ionisation Smoke Alarm with Battery Backup
  • 9v battery back up (included)
  • 5 Year Warranty
  • BS5446-1:2000
Although this Newlec Branded NL3631 is not available we can provide an exact replacement.
Please order below.

===============================================
The following text does not apply to the NL3631 only the NL3602 (be very specific when reading the model numbers!).
Please Note.
If you are looking for a replacement for the Newlec NL3602 read on...

The NL3602 is not available and the NL3631 will not directly replace the NL3602 without removing the existing fittings and replacing with the fittings supplied with the new NL3631 (670MBX or 770MBX).
The ceiling fixing plate and electrical connector of your existing NL3602 will need to be replaced.
We suggest replacing  the NL3602 with the 670MBX or 770MBX (see related products below) but bear in mind that you will need to strip and discard ALL existing fittings!!

Everything you need for the new installation is supplied with the 670MBX or 770MBX.

The 770MBX is a 670MBX with the addition of the push-fit 700 series base / pattress.

Discontinued Product
14.54
Newlec NL3602 Mains Powered Ionisation Smoke Alarm with Battery Backup
  • 9v battery back up (included)
  • 5 Year Warranty
  • BS5446-1:2000
Please Note.
If you are looking for a replacement for the Newlec NL3602 read on...

The NL3602 is NOT available.

We suggest replacing  the NL3602 with the 670MBX or 770MBX (see related products below) but bear in mind that you will need to strip and discard ALL existing fittings (fixing plate & electrical connector etc.) and reuse the existing mains wiring.

Everything you need for the new installation is supplied with the 670MBX or 770MBX.

The 770MBX is a 670MBX with the addition of the push-fit 700 series base / pattress.

Diameter of ceiling fixing plates:
NL3602 - 115mm
670MBX - 132mm
770MBX - 140mm
So, with care the footprint of the existing NL3602 will be covered by either of the 670MBX or 770MBX.
Discontinued Product
10.87
Newlec NL3632 Mains Powered Smoke Detector
  • Mains powered only (no battery backup)
  • 5 Year Warranty
  • BS5446-1:2000
Please order BRK DICON 670MBX
15.99
BRK Electronics 2002RACEN (RACE) Mains Powered Interconnectable Photoelectric Smoke Alarm

PLEASE NOTE that all models of the BRK 2002 Photoelectric Smoke Alarms have been discontinued.

The alarm that is the easiest to install in its place is the BRK 7010BE or BRK 7010LBE as you can use your existing electrical connector.

Also you will be able to use your existing ceiling fixing plate (and ceiling pattress/junction box if fitted) when used with our FREE OF CHARGE modified ceiling fixing plate.
There's no need to request this when purchasing as we drill all the new ceiling fixing plates to suit the pattresses (SMK839) of the 86R (& BRK2002).



Please scroll down the page or click on the respective "Related products:" for
details of the BRK 7010BE and BRK 7010LBE


 

CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

To purchase the BRK 7010BE or 7010LBE please see Related Items below.

If you need any assistance please call 01942 516162


Discontinued Product
18.60
BRK SMK623RCB Smoke Alarm Relay Base/PattressIf remote signalling is required, a relay version of the surface mounting pattress (SMK623RCB) should be used.

This has volt free contacts and is installed in a similar way to the standard pattress. 

For use with the BRK 7010BE and 7010LBE.
In Stock
(20 Item(s) In Stock)
22.62
BRK DICON 670MC Mains Powered Interconnectable Ionisation Smoke Alarm
With Capacitor Backup

The Dicon 670MC 230 volt Hardwire Smoke and Fire Alarm is an all purpose mains powered device incorporating the latest technology for sensing visible and invisible particles of combustion.
The environment-friendly capacitor back up provides exceptionally long service life and will power the unit in the event of a mains failure for a minimum of 72 hours.
Up to 12 units can be linked for simultaneous warning.
The alarm pause option allows easy silencing of "non-emergency" alarms.


Features
  • 230 Volt Mains Powered
  • No batteries required
  • Tamper Proof Capacitor Back up
  • Test & Alarm Pause Button
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Full Integral Capacitor Monitoring
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm

Technical Specifications

Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60HzCapacitor
Back up........Minimum 72 hours standby plus 4 minutes alarm
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
OperatingTemperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................170g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes




Download or view Data Sheet

In Stock
18.40
BRK 7010BE Mains Powered Interconnectable Photoelectric Smoke Detector Alarm - Alkaline







NEW - MAY 2020

We can now supply an adapter plate to make a better job of  fitting the BRK 7010BE onto the existing fittings of the old discontinued BRK 86RACE & BRK 2002RACE smoke alarms.

Please see "RELATED ITEMS" below.









Product Description


The BRK 7010BE is a mains powered optical smoke alarm with 9 volt alkaline battery back up.
Up to 12 compatible smoke and heat alarms can be linked for simultaneous warning.


Features

  • 230V mains powered
  • 9 volt alkaline battery included
  • Test and alarm pause button
  • Optical technology reduces nuisance alarms
  • Low battery warning
  • Multi-alarm interlink
  • LED operating indicators
  • Alarm source indicator
  • Mounting base plate
  • 5 year guarantee
  • Certified to BS EN 14604: 2005

Technical Specifications

  • Technology: Photoelectric
  • Alarm sound level: 85dB
  • Battery type: 9v alkaline battery
  • Operating temperature 4C to 38C
  • Dimensions 127mm diameter

Download or view Data Sheet

 This alarm can be used to replace the old obsolete BRK 86 & BRK 2002 models.

The existing electrical connector will just simply plug into the new alarm.
We now modify ALL our 7010BE & 7010LBE fixing plates to fit the old fittings.

  
CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING BRK 86RACE or BRK 2002RACE CEILING PLATE
OUT OF STOCK
26.78
BRK 7010LBE Mains Powered Interconnectable Photoelectric Smoke Alarm - Lithium
IF THIS ITEM IS OUT OF STOCK WE SUGGEST USING THE STANDARD 7010BE WHICH IS EXACTLY THE SAME ALARM BUT WITH A REPLACEABLE ALKALINE BATTERY INSTEAD OF THE LITHIUM BATTERY.
See related items below...

PLEASE NOTE - that contrary to information suggesting that the BRK 670MBX Ionisation Smoke Alarm will replace the discontinued BRK 86R (all variants - RACE, RACHE10N etc...) Mains Powered Ionisation Smoke Alarm using the same fittings is totally incorrect!

If purchasing a BRK 670 (any variant) to replace the BRK 86, all the existing fittings, including the electrical connector will need to be removed and replaced with the new fittings supplied with the alarm.
This is why we recommend using the 7010BE (or 7010LBE).

We drill the new ceiling fixing plates to suit the pattresses (SMK839) of the 86R (& BRK2002) but more importantly the 7010BE (or 7010LBE) will connect using the existing wiring and electrical connector.

If further clarification is required please contact us by email or phone (see "Contact Us" in the menu bar).
-------------------------------------------------------------------------------------------------------------------------------------------

Lithium Battery Backup

Product Description

The BRK 7010LBE is a 230 volt mains powered optical smoke alarm with 10 year lithium battery back that will provide power to the unit in the event of a mains failure.
Up to 12 compatible units can be linked for simultaneous warning.


Features

  • 230V mains powered
  • 9V lithium battery included
  • Test and alarm pause button
  • Optical technology reduces nuisance alarms
  • Low battery warning
  • Multi-alarm interlink
  • LED operating indicators
  • Alarm source indicator
  • Mounting base plate
  • 10 year guarantee
  • Certified to BS EN 14604: 2005

Technical Specifications

  • Technology: Photoelectric
  • Alarm sound level: 85dB
  • Battery type: 9v lithium battery
  • Operating temperature 4C to 38C
  • Dimensions 127mm

Download or view Data Sheet

 

This alarm can be used to replace the old obsolete BRK 86 & BRK 2002 models.
The existing electrical connector will just simply plug into the new alarm.
We now modify ALL our 7010BE & 7010LBE fixing plates to fit the old fittings - there is no need to request this, we do it whether you need it or not!

 

 

CLICK HERE TO SEE HOW THE NEW BRK 7010LBE CAN BE INSTALLED ONTO YOUR EXISTING BRK 86RACE OR 2002RACE CEILING PLATE

 


1 - 2 days Standard Delivery
Discontinued Product
2.80
BRK SMK623A Smoke Alarm Base/PattressSuitable for the BRK 7010 range of BRK mains powered alarms where a surface mounting is required.

Dimensions: 132mm diameter x 25mm deep

Hole Centres: 92 mm
Suitable for 7010 range of BRK mains powered alarms where a surface mounting is required.
Dimensions: 132mm diameter x 25mm deep
Hole Centres: 92 mm
Discontinued Product
24.74
BRK DICON 650MC Mains Powered Interconnectable Photoelectric Smoke Alarmwith Capacitor Backup

Uncompromisingly designed with public sector development in mind the Dicon 650MC 230 volt Hardwire Smoke Alarm is a mains powered photoelectric device; incorporating the latest technology for seeing visible particles of combustion, making it ideal for detecting slow smouldering fires.

The environment-friendly capacitor back up provides power to the unit in the event of a mains failure for a minimum of 72 hours in standby mode.
Up to 12 suitable smoke and heat alarms can be linked for simultaneous warning.
With capacitor back up there is no need to replace batteries.
Features
  • 230 Volt Mains Powered
  • No batteries required
  • Tamper Proof Capacitor Back up
  • Photoelectric - Most Sensitive to Smouldering Fires
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Full Integral Capacitor Monitoring
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133 mm dia x 38 mm
Technical Specifications

Sensor..........................Photoelectric
Voltage.........................230 volt AC (~) 50-60Hz
Capacitor Back up........Minimum 72 hours standby plus 4 minutes alarm
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
Operating Temperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................170g
Test & Pause Button.....Tests sensitivity, circuits, horn.


Download or view Data Sheet

OUT OF STOCK
27.66
BRK DICON 680MRL (790MRL) Mains Powered Interconnectable Heat AlarmWith Tamperproof Rechargeable Lithium Battery Cells Backup.
The Dicon 680MRL 230 volt Heat Alarm with rechargeable lithium battery back up is designed for use in the kitchen.
The 10 year rechargeable battery back up provides power to the unitin the event of a mains failure.
Incorporating a thermistor heat sensing element for accuracy and reliability.
The 680MRL can be linked with up to 11 compatible smoke and heat alarms,providing additional protection.


Features
  • 230 Volt Mains Powered
  • Backup with tamper-proof rechargeable lithium cells*
  • Test Button
  • Accurate Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • Mounting Base Plate
  • 5 Year Guarantee
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions: 134mm dia x 57mm
*Lithium cells give reliable back up for at least six months of power out in standby mode.Back up cells have a 10 year life and are environment friendly

Technical Specifications

Sensor........................................Thermistor
Sensing range.......................... 54C to 70C
Voltage........................................230 volt AC 50-60Hz
Lithium Battery Back up...............1 month standby
Interlink.........................................Up to 12 alarmsAlarm
Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, horn
Indicator Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red


Download or view Data Sheet


Please note that if this heat alarm is being purchased to replace an existing BRK alarm, then the existing electrical connector will need to be replaced with the new connector supplied with the alarm - three wires.Also the existing mounting plate will need to be replaced with the new one supplied with the alarm - just two screws.The new mounting plate will fit the existing pattress (SMK623A) if fitted.
22.22
BRK DICON 680MBX (now 690MBX) Mains Powered Interconnectable Heat AlarmWith Alkaline Battery Backup

The Dicon 680MBX 230 volt Heat Alarm with battery back up is designed for use in the kitchen, garage and boiler room.
Incorporating a thermistor heat sensing element for accuracy and reliability, the 680MBX can be linked to up to 11 compatible mains smoke and heat alarms, providing additional protection.


Features
  • 230 Volt Mains Powered
  • Test Button
  • Accurate Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • 9 volt Battery Included
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • Mounting Base Plate
  • 5 Year Guarantee (alarm only)
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions: 134mm dia x 57mm

Technical Specifications

Sensor.........................................Thermistor. Sensing range 54C to 70C
Voltage........................................230 volt AC ( ) 50-60Hz
Battery Back up...........................9V PP3 alkaline
Interlink.........................................Up to 12 alarms
Alarm Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, horn
Indicator Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red


Download or view Data Sheet


Discontinued Product
16.86
BRK 86RACE Mains Interconnectable Ionisation Smoke Alarm

PLEASE NOTE that all models of the BRK 86 Ionisation Smoke Alarms have been discontinued.


The alarm that is the easiest to install in its place is the BRK 7010BE or BRK 7010LBE as you can use your existing electrical connector.

Also you will be able to use your existing ceiling fixing plate (and ceiling pattress/junction box if fitted) when used with our FREE OF CHARGE modified ceiling fixing plate.
There's no need to request this when purchasing as we drill all the new ceiling fixing plates to suit the pattresses (SMK839) of the 86R (& BRK2002).


CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

 
PLEASE SCROLL DOWN THE PAGE TO SEE THE LATEST METHOD OF REPLACEMENT USING OUR NEW ADAPTER PLATE - MAY 2020

A much cheaper replacement option would be the DICON 670MBX (or any of the DICON 670 range) but you would need to change the electrical connector (three screws) and ceiling fixing plate (two screws).

Please scroll down the page or click on the respective "Related products:" for

details of the BRK 7010BE, BRK 7010LBE and DICON 670MBX

Discontinued Product
2.80
BRK DICON Pattress CB232 for mains hardwired smoke and heat alarmsThe CB232 pattress acts as the universal surface mounting facility for all Dicon smoke and heat alarms.
With both top and side entries to accommodate cable and mini trunking installations, the CB232 provides spacious room for wiring in premises such as flats where concrete ceilings can be problematic.




FEATURES
  • Low profile for a neater installation
  • Colour coordinated to match the alarm
  • Easy to fix
  • Robust ABS design
TECHNICAL SPECIFICATIONS
  • Dimensions: Diameter 130mm Depth 30mm
  • 4 gang 5 amp strip connector
  • Linking screws
  • 2 x 20mm top entry knock-outs
  • 1 Side entry knock-out for mini trunking
OUT OF STOCK
19.75
BRK DICON Relay Pattress CB300 for mains hardwired smoke and heat alarmsThe CB300 pattress complete with relay contacts, acts as the universal surface mounting facility for all Dicon smoke and heat alarms.
Its specific application is where a Dicon smoke or heat alarm is required to operate with a remote telemetry system or ancillary device such as an automatic door release.
With both top and side entries to accommodate cable and mini trunking installations, the CB300 provides spacious room for wiring in premises such as flats where concrete ceilings can prove to be problematic.


FEATURES
  • Low profile for a neater installation
  • Interlink connection
  • Colour coordinated to match the alarm
  • Easy to fix
  • Robust ABS design
TECHNICAL SPECIFICATIONS
  • Dimensions: Diameter 130mm Depth 30mm
  • Relay provides NO/NC/C volt-free contacts.Maximum contact rating: 260VAC at 2 amps, 60VDC at 2 amps
  • Mains and interlink connections
  • Linking screws
  • 2 x 20mm top entry knock-outs
  • 1 Side entry knock-out for mini trunking
14.54
BRK DICON 670MBX Mains Powered Interconnectable Ionisation Smoke Detector Alarm
PLEASE NOTE - that contrary to information suggesting that the BRK 670MBX Ionisation Smoke Alarm will replace the discontinued BRK 86R (all variants - RACE, RACHE10N etc...) Mains Powered Ionisation Smoke Alarm using the same fittings is totally incorrect!

If purchasing a BRK 670 (any variant) to replace the BRK 86, all the existing fittings, including the electrical connector will need to be removed and replaced with the new fittings supplied with the alarm.

This is why we recommend using the 7010BE (or 7010LBE). We drill the new ceiling fixing plates to suit the pattresses (SMK839) of the 86R (& BRK2002) but more importantly the 7010BE (or 7010LBE) will connect using the existing wiring and electrical connector.

If further clarification is required please contact us by email or phone (see "Contact Us" in the menu bar).
---------------------------------------------------------------------------


with Alkaline Battery Backup.

The DICON 670MBX Smoke Alarm is a new slimline version of Dicons popular 370MBX.
The 9 volt battery provides power during mains failures.
The 670MBX also incorporates an Alarm Pause facility for easy silencing of non-emergency alarms.
Up to 12 compatible Smoke and Heat Alarms can be linked for simultaneous warning.


Features
  • 230 Volt Mains Powered
  • 9V Alkaline Battery Included
  • Test & silence button
  • Low Battery Warning
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm

 
Technical Specifications

Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................9V PP3 battery back up
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
OperatingTemperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes



Download or view Data Sheet


OUT OF STOCK
22.53
BRK DICON 670MRL (770MRL) Mains Powered Interconnectable Ionisation Smoke AlarmWith Rechargeable Lithium Battery Backup

The Dicon 670MRL Smoke Alarm is a mains powered device incorporating the latest technology for sensing visible and invisible particles of combustion.
The 10 year rechargeable battery back up provides power to the unit in the event of a mains failure for a minimum of 6 months in standby mode.
Up to 12 compatible units can be linked for simultaneous warning.
The 670MRL also incorporates an Alarm Pause facility which activates a red LED to flash every 10 seconds and emits a double beep when it automatically resets.


Features
  • 230 Volt Mains Powered
  • 9V Rechargeable Lithium Battery Incorporated
  • Test & Alarm Pause Button
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Full Integral Battery Monitoring
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm


Technical Specifications

Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................Rechargeable lithium back up
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
OperatingTemperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes



Download or view Data Sheet

20.61
BRK DICON 650MBX (660MBX) Mains Powered Interconnectable Photoelectric Smoke AlarmWith Alkaline Battery Backup

The Dicon 650MBX Mains Photoelectric Smoke Alarm incorporates the latest technology for seeing visible particles of combustion, making it ideal for detecting slow, smouldering fires.
The 9 volt battery back up provides power to the unit in the event of a mains failure.
Up to 12 compatible smoke and heat alarms can be linked for simultaneous warning.

Features
  • 230 Volt Mains Powered
  • 9V Battery Included
  • Test Button
  • Low Battery Warning
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Sensitivity Test Button
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm
Technical Specifications

Sensor..........................Photoelectric
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................9V PP3 battery back up
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry & backup red
Operating Temp Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn.

Download or view Data Sheet
20.61
BRK DICON 660MBX Mains Powered Interconnectable Photoelectric Smoke AlarmWith Alkaline Battery Backup

The Dicon 660MBX (previously 650MBX) Mains Photoelectric Smoke Alarm incorporates the latest technology for seeing visible particles of combustion, making it ideal for detecting slow, smouldering fires.
The 9 volt battery back up provides power to the unit in the event of a mains failure.
Up to 12 compatible smoke and heat alarms can be linked for simultaneous warning.

Features
  • 230 Volt Mains Powered
  • 9V Battery Included
  • Test Button
  • Low Battery Warning
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Sensitivity Test Button
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm
Technical Specifications

Sensor..........................Photoelectric
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................9V PP3 battery back up
Interlink.........................Up to 12 alarms
Alarm Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry & backup red
Operating Temp Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn.

Download or view Data Sheet
26.66
BRK DICON 650MRL (760MRL) Mains Interlinked Optical Smoke Alarm now with Push-Fit BaseNEW MODEL 760MRL HAS ENHANCED OPTICAL SENSOR

BACK IN STOCK

With Rechargeable Lithium Battery Backup

The Dicon 650MRL Mains Photoelectric Smoke Alarm incorporates the latest technology for seeing visible particles of combustion, making it ideal for detecting slow, smouldering fires.
The 10 year rechargeable lithium battery back up provides power to the unit in the event of a mains failure for a minimum period of 6 months in standby mode.
Up to 12 compatible smoke and heat alarms can be linked for simultaneous warning.


Features
  • 230 Volt Mains Powered
  • 9V Rechargeable Lithium Battery Incorporated
  • Test Button
  • Superior Sensing Technology
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Full Integral Battery Monitoring
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm

Technical Specifications

Sensor..........................Photoelectric
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................Rechargeable lithium back up
Interlink.........................Up to 12 alarmsAlarm
Sound Level........85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
OperatingTemperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn.




Download or view Data Sheet

9.47
BRK DICON M300i Battery Powered Smoke Alarm with InterlinkSuccessor to the BRK 83RIECN


ONE ONLY IN STOCK


Product Description


The Micro 300i Linkable Smoke Alarm can be linked to up to 11 other suitable smoke and heat alarms.
This extends security economically over a large area; when one sounds they all do.
Pressing the test button confirms that the interconnect is operating.

Features

  • 9 volt - battery operated
  • Can be linked to as many as 11 other suitable battery operated alarms
  • Low battery warning
  • Compact design
  • Battery included
  • Dual ionisation sensor
  • Loud piezo electric alarm
  • 5 year guarantee on alam
  • BS EN 14604: 2005
Technical Specifications
  • Detection Method - Ionisation
  • Dimensions - 111mm diameter x 37mm high
  • Battery Life - 1/2 years
  • Recommended Operating Temp. Range - 5 to 38
  • Alarm Sound Level - 85dBat 3M

test link
11.14
BRK DICON H380 Battery Powered Heat AlarmPlease note that this is a standalone heat alarm and is not designed to interconnect with other smoke or heat alarms.

Product Description

The H380 is a 9 volt battery operated heat alarm, designed for use in residential kitchens, boiler rooms and garages.

Features
  • Test & alarm pause button
  • Advanced thermistor sensing technology
  • Low-profile design
  • 5 Year Guarantee
  • Approvals: CE


Discontinued Product
26.11
BRK DICON 680MC Mains Powered Interconnectable Heat AlarmWith Capacitor Back-up

The 680MC 230V Heat Alarm is designed for use in the kitchen.
Incorporating a thermistor heat sensing element for accuracy and reliability, the 680MC can be linked to up 11 compatible 230V smoke and heat alarms, providing additional protection.
The environmentally-friendly capacitor back up provides power to the unit in the event of a mains failure for a minimum of 72 hours in standby mode.
With capacitor back up there is no need to replace batteries.


Features
  • 230 Volt Mains Powered
  • Test Button
  • Accurate Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • Mounting Base Plate
  • 5 Year Guarantee
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions: 134mm dia x 57mm
Technical Specifications

Detecting Method........................Heat alarm
Sensivity......................................Thermistor
Sensing range.......................... 54C to 70C
Voltage........................................230 volt AC ( ) 50-60Hz
Interlink.........................................Up to 12 alarmsAlarm
Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Test Button...................................Tests sensitivity, circuits, horn


Download or view Data Sheet


Please note that if this heat alarm is being purchased to replace an existing BRK alarm, then the existing electrical connector will need to be replaced with the new connector supplied with the alarm - three wires.Also the existing mounting plate will need to be replaced with the new one supplied with the alarm - just two screws.The new mounting plate will fit the existing pattress (SMK623A) if fitted.
14.54
BRK DICON 770MBX Mains Powered Interconnectable Ionisation Smoke Detector Alarm with Push-Fit BaseIn-the-box: 1 x 670MBX + 1 x 700 Series Push-fit Base + Instructions + Dust Cover

The 770MBX is a mains powered ionisation smoke alarm with 9V alkaline battery back-up and a PUSH-FIT docking base system; designed to ensure quick and easy installation of base unit to the mains feed supply at installation stage (1st fix) and for quick and easy connection of alarm to base unit (2nd fix).Up to 12 compatible Smoke and Heat Alarms can be linked for simultaneous warning

Features
  • 230 Volt Mains Powered
  • 9V Alkaline Battery Included
  • PUSH-FIT docking base (DS700 included)
  • Test & silence button
  • Low Battery Warning
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm

 

Download or view Data Sheet

Technical Specifications

Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................9V PP3 battery back up
Interlink.........................Up to 12 alarms Alarm
Sound Level..................85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
Operating Temperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes

OUT OF STOCK
22.53
BRK DICON 770MRL (670MRL) Mains Powered Interconnectable Ionisation Smoke Alarm with Push-Fit Base
The 770MRL is a mains powered ionisation smoke alarm with rechargeable lithium battery back-up and a PUSH-FIT docking base system; designed to ensure quick and easy installation of the base unit to the mains feed supply at installation stage (1st fix) and for quick and easy connection of alarm to base unit (2nd fix).
Up to 12 compatible Smoke and Heat Alarms can be linked for simultaneous warning.


Features
  • 230 Volt Mains Powered
  • Long life rechargeable lithium battery back-up
  • PUSH-FIT docking base (DS700 included)
  • Test & silence button
  • Low Battery Warning
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm

Technical Specifications
Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................Long life rechargeable lithium battery back-up
Interlink.........................Up to 12 alarms
Sound Level..................85dB at 3m
Indicator Light...............Solid-state LEDs AC power green; circuitry red
Operating 
Temperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes


 

Download or view Data Sheet

15.61
BRK DICON 750MBX (760MBX) Mains Powered Interconnectable Optical Smoke Alarm with Push-Fit BaseThis alarm can be used to replace an existing 650MBX (or 660MBX) - just discard the supplied push-fit base and use your existing electrical connector and ceiling plate.

All parts for a completely new installation are supplied in the box with the alarm.

------------------------------------------------



The 750MBX is a mains powered optical smoke alarm with 9V alkaline battery back-up and a PUSH-FIT docking base system designed to ensure quick and easy installation of base unit to the mains feed supply at installation stage (1st fix) and for quick and easy connection of alarm to base unit (2nd fix).

Up to 12 compatible Smoke and Heat Alarms can be linked for simultaneous warning.


Features
  • 230 Volt Mains Powered
  • 9V Alkaline Battery Included
  • PUSH-FIT docking base (DS700 included)
  • Test & silence button
  • Low Battery Warning
  • Multi-Alarm Interlink
  • LED Operating Indicators
  • Alarm Source Indicator
  • Mounting Base Plate
  • Push-fit Connector - Easy to Install
  • 5 Year Guarantee
  • Certified to BS EN 14604: 2005
  • CE
  • Dimensions: 133mm dia x 38mm
Technical Specifications

Sensor..........................Dual ionization
Voltage.........................230 volt AC (~) 50-60Hz
Back up........................9V PP3 battery back up
Interlink.........................Up to 12 alarmsAlarm
Sound Level........85dB at 3mIndicator Light...............Solid-state LEDs AC power green; circuitry red
OperatingTemperature Range......5C (40F) to 38C (100F)
Relative Humidity..........10% to 85%
Dimensions...................133mm x 38mm
Weight..........................135g
Test & Pause Button.....Tests sensitivity, circuits, horn. Pauses approximately 10 minutes



Download or view Data Sheet

22.22
BRK DICON 790MBX Mains Powered Interconnectable Heat Alarm with Push-fit Base
The 790MBX is a mains powered heat alarm with 9V alkaline battery back-up and a PUSH-FIT docking base system; designed to ensure quick and easy installation of base unit to the mains feed supply at installation stage (1st fix) and for quick and easy connection of alarm to base unit (2nd fix).


Features
  • 230 Volt Mains Powered
  • Test Button
  • PUSH-FIT docking base (DS700 included)
  • Advanced Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • 9 volt Battery Included
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • 5 Year Guarantee (alarm only)
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions - Alarm = 127mm (D) x 60mm (H) - Base = 140mm (D) x 33mm (H

Technical Specifications

Sensor.........................................Thermistor.
Sensing range 54C to 70C
Voltage........................................230 volt AC ( ) 50-60Hz
Battery Back up...........................9V PP3 alkaline
Interlink.........................................Up to 12 alarms
Alarm Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, horn
Indicator Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red


Download or view Data Sheet

22.22
BRK DICON 690MBX (was 680MBX) Mains Powered Interconnectable Heat AlarmReplacement for the 680MBX

The 690MBX is a mains powered heat alarm with 9V alkaline battery back-up.


Features
  • 230 Volt Mains Powered
  • Test Button
  • Advanced Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • 9 volt Battery Included
  • Alarm Source Indicator
  • 5 Year Guarantee (alarm only)
  • Certified to BS EN 5446-PT 2: 2003
  • CE
Technical Specifications

Sensor.........................................Thermistor.
Sensing range 54C to 70C
Voltage........................................230 volt AC ( ) 50-60Hz
Battery Back up...........................9V PP3 alkaline
Interlink.........................................Up to 12 alarms
Alarm Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, horn
Indicator Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red


Download or view Data Sheet

OUT OF STOCK
27.66
BRK DICON 790MRL (780MRL) Mains Powered Interconnectable Heat Alarm
The 790MRL (780MRL) is a mains powered heat alarm with rechargeable lithium battery back-up and a PUSH-FIT docking base system; designed to ensure quick and easy installation of base unit to the mains feed supply at installation stage (1st fix) and for quick and easy connection of alarm to base unit (2nd fix).


Features
  • 230 Volt Mains Powered
  • Test Button
  • PUSH-FIT docking base (DS700 included)
  • Advanced Thermistor Sensing Technology
  • Multi-alarm Interlink
  • LED Operating Indicators
  • Long life rechargeable lithium battery back-up
  • Alarm Source Indicator
  • Push-fit Connection - Easy to Install
  • 5 Year Guarantee (alarm only)
  • Certified to BS EN 5446-PT 2: 2003
  • CE
  • Dimensions - Alarm = 127mm (D) x 60mm (H) - Base = 140mm (D) x 33mm (H)
Technical Specifications

Sensor.........................................Thermistor.
Sensing range 54C to 70C
Voltage........................................230 volt AC ( ~) 50-60Hz
Battery Back up...........................9V PP3 alkaline
Interlink.........................................Up to 12 alarms
Alarm Sound Level.......................85dB at 3m
Operating Temperature Range.....5C (40F) to 38C (100F)
Relative Humidity..........................10% to 85%
Dimensions...................................134mm x 57mm
Weight..........................................195g
Test Button...................................Tests sensitivity, circuits, hornIndicator
Lights.............................Solid-state LEDs: AC powergreen; circuitry and back up red



Download or view Data Sheet