DICON Smoke Alarm Fittings

2.80
BRK DICON Pattress CB232 for mains hardwired smoke and heat alarmsThe CB232 pattress acts as the universal surface mounting facility for all Dicon smoke and heat alarms.
With both top and side entries to accommodate cable and mini trunking installations, the CB232 provides spacious room for wiring in premises such as flats where concrete ceilings can be problematic.


FEATURES
  • Low profile for a neater installation
  • Colour coordinated to match the alarm
  • Easy to fix
  • Robust ABS design
TECHNICAL SPECIFICATIONS
  • Dimensions: Diameter 130mm Depth 30mm
  • 4 gang 5 amp strip connector
  • Linking screws
  • 2 x 20mm top entry knock-outs
  • 1 Side entry knock-out for mini trunking
33.48
Available in 5 days
BRK Dicon Radiolink Base DS700RFPLEASE NOTE - although we do not keep stock of this item we can normally supply within 5 working days.

The RF base provides a wireless interlink between mains powered smoke and heat alarms; it is quick to install and quick to link, ensuring greater output and savings.
The base unit has been designed to transmit an RF signal, when the alarm attached to it senses smoke or fire.
When another RF base receives this signal the attached smoke or heat alarm will also sound, eliminating the need for connection wires between each alarm.
This is also a particularly useful system to use when refurbishing or extending an existing property.
The DS700RF can be used in conjunction with any 230V smoke and heat alarms in the 650, 670 & 680 series.
With both top and side entries to accommodate cable and mini trunking installations - the Push-fit connection facility allows for quick and easy fitting at installation stage (1st fix) - also enables the ability for the alarm to be detached safely from the mains power for general maintenance purposes (2nd fix).
Installed with an automatic ID coding system which can be activated by a screwdriver prevents individual alarm systems in a group of properties from interacting with each other causing nuisance alarms.

Features
10yr lithium battery
"Push-fit" docking base system
Automatic ID coding
Multiple repeater RF signalling RF transmitter and receiver in each base unit
Interlink up to 50 smoke & heat alarms in the BRK range
Audible & visual LED fault warnings
5 year guarantee

Technical Specifications
Model number DS700RF
Description RF interlink system
Technology Radio frequency: 868MHz
Battery type 10yr lithium battery
Operation AC/DC DC
Installation positions Ceiling range = 150m min in open area
Guarantee 5 years
Dimensions 140mm (Diameter) x 30mm (Height) Unit weight 145g
CE mark


Download Datasheet

19.75
OUT OF STOCK
BRK DICON Relay Pattress CB300 for mains hardwired smoke and heat alarmsThe CB300 pattress complete with relay contacts, acts as the universal surface mounting facility for all Dicon smoke and heat alarms.
Its specific application is where a Dicon smoke or heat alarm is required to operate with a remote telemetry system or ancillary device such as an automatic door release.
With both top and side entries to accommodate cable and mini trunking installations, the CB300 provides spacious room for wiring in premises such as flats where concrete ceilings can prove to be problematic.


FEATURES
  • Low profile for a neater installation
  • Interlink connection
  • Colour coordinated to match the alarm
  • Easy to fix
  • Robust ABS design
TECHNICAL SPECIFICATIONS
  • Dimensions: Diameter 130mm Depth 30mm
  • Relay provides NO/NC/C volt-free contacts.Maximum contact rating: 260VAC at 2 amps, 60VDC at 2 amps
  • Mains and interlink connections
  • Linking screws
  • 2 x 20mm top entry knock-outs
  • 1 Side entry knock-out for mini trunking