Err

BRK Smoke Alarm Fittings

1.50
BRK 86RACE & 2002RACE Laser Cut Adapter Plate for BRK 7010BENEW - May 2020

This precision laser cut 3mm thick plastic adapter plate can be used to fit the BRK 7010BE Photoelectric Smoke Alarm as a replacement for the discontinued BRK 86RACE Ionisation Smoke Alarm & BRK 2002RACE Photoelectric Smoke Alarm (all variants).

It can be used to replace the old alarm fixing plates whether they are fitted directly to the ceiling or are fitted into a pattress base (SMK839).

Please see the slideshows of how to do this using the links below.

The first slideshow of images shows how to do this when the existing alarms are fitted directly by a fixing plate to the ceiling.

The second slideshow of images shows how to do this when the existing alarms are fitted by a fixing plate inside a pattress base (SMK839).

Please note this item will be supplied with the BRK 7010BE Photoelectric Smoke Alarm only and will not be supplied separately (except for existing customers).

The plate has removable protective film on both faces.


SLIDESHOW -  FOR ALARMS FITTED WITHOUT PATTRESS BASE

SLIDESHOW - FOR ALARMS FITTED WITH PATTRESS BASE
2.80
Discontinued Product
BRK SMK623A Smoke Alarm Base/PattressSuitable for the BRK 7010 range of BRK mains powered alarms where a surface mounting is required.

Dimensions: 132mm diameter x 25mm deep

Hole Centres: 92 mm
Suitable for 7010 range of BRK mains powered alarms where a surface mounting is required.
Dimensions: 132mm diameter x 25mm deep
Hole Centres: 92 mm
18.60
Discontinued Product
BRK SMK623RCB Smoke Alarm Relay Base/PattressIf remote signalling is required, a relay version of the surface mounting pattress (SMK623RCB) should be used.

This has volt free contacts and is installed in a similar way to the standard pattress. 

For use with the BRK 7010BE and 7010LBE.
18.60
Discontinued Product
BRK SMK839RCB Smoke Alarm Relay Base/PattressIf remote signalling is required, a relay version of the surface mounting pattress (SMK839) should be used.

This has volt free contacts and is installed in a similar way to the standard pattress.

For use with the BRK 86 range and BRK 2002 range.

Even though this item has been discontinued, we still have stock.