Applications

The Ei168 RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire.
When it receives an RF alarm signal from another Ei168 Base, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms.

It is designed for use with the EasiFit range of Mains Powered Smoke/Heat Alarms.
The RadioLINK Base itself, is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure.

The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK Base rather than to its normal mounting plate.

As many as 12 units can be interconnected in this way.