Ei Carbon Monoxide Alarms

AICO Ei 205ENA Battery Powered CO Alarm With Memory

MEMORY FEATURES
When the button is pressed the unit indicates if it has detected CO as follows:-
Green light flashes - no CO detected

Red light flashes slowly every 2 seconds - 150-300ppm CO detected

Red light flashes rapidly every 0.5 second - over 300ppm CO detected

This helps identify CO leaks (and where they located) more quickly as your home is being monitored even in your absence. Holding the test button (about 20 seconds) until the green light flashes resets the memory feature.

FURTHER INFORMATION

Many people are killed each year and many more suffer ill health from Carbon Monoxide (CO) poisoning. CO is an odourless, tasteless and extremely toxic gas. It is produced by appliances burning fuels, such as coal, oil, natural/bottled gas, paraffin, wood petrol, diesel, charcoal etc.

Apparatus conforming to the BS7860 : 1996 standard may not protect people who are at special risk from Carbon Monoxide exposure by reason of age, pregnancy or medical condition. If in doubt, consult your medical practitioner.

A Carbon Monoxide detector is not a substitue for a smoke alarm or a combustible gas detector.

The alarm must be installed according to the instructions enclosed with the unit.

More Info...

Price:
£25.03
£30.04 Including VAT at 20%

AICO Ei Professional Ei 225EN Mains Powered Carbon Monoxide Alarm

Applications

The 225E Series mains powered alarms use a proven electrochemical cell type sensor which checks CO concentration every 50 seconds. Reaction to CO gas is fast and they recover quickly when CO is no longer present. All units are individually calibrated in CO gas to ensure accuracy and peak performance and they carry a lifetime 5 year guarantee.

The alarm circuitry is automatically monitored and warns if a fault develops. A Test/Hush button confirms that the horn and electronics are working and silences alarms caused by transient CO levels. The alarm will automatically sound again after 4 minutes if high levels of CO are still present. Additionally a memory feature records if CO has been detected whilst the occupier was away.

To assist landlords with multiple CO installations, testing with CO gas has been made mush easier with the Quick CO Test Mode feature. This reduces the waiting time for testing from as much as 5 minutes down to approximately 20 seconds per alarm, a significant time and cost saving on a large installation.

A built-in pattress with terminal block simplifies installation. The alarms can be surfaced wired without the need for a recessed junction box.

Main Features

Advanced Electrochemical Sensor
Calibrated and Tested in CO
Test/Hush button
Comprehensive indicator lights
Low and High Level Alarm Indicator
Distinctive alarm sound
Automatic self checking circuit
Memory
Quick CO Gas Test
Easy to install - Built-in pattress
Neat slimline design
Suitable for both ceiling and wall mounting
No maintenance
5 Year Guarantee

Larger Image...

Price:
£25.00
£30.00 Including VAT at 20%