BRK Mains Powered Smoke & Heat Alarms

BRK COMPATIBILITY
PLEASE NOTE THAT ALL BRK ALARMS USE THE SAME ELECTRICAL CONNECTOR & ARE COMPATIBLE WITH ALL OTHER MODELS OF BRK ALARMS BOTH PAST & PRESENT

BRK 86RACEN Mains Powered Interconnectable Ionisation Smoke Alarm
(Previously 86RACE or 86RACEMP - ALL MODELS OF BRK MAINS POWERED SMOKE ALARMS ARE COMPATIBLE WITH EACH OTHER)

With Alkaline Battery Backup
Powered from 230volt AC, 50Hz.
Comes with long-life 9 volt backup battery in easy access compartment.
Mounting bracket installs quickly with plug-in connector.
Interconnectable - up to 12 AC BRK smoke alarms.

When interconnected and operating on AC power, any alarm will identify itself by turning off its LED while other units' LEDs remain on.
Full function test alarm button.
Loud 85 dB alarm horn.
Pattress (mounting base) available - see below.
5 year guarantee.

More Info...
Price:
£19.96
£23.45 Including VAT at 17.5%

Select this box to order a Mounting Pattress SMK839 for each alarm. Price: £3.32 (£3.90 Including VAT at 17.5%)

Related products:

1. BRK 7010BE Mains Powered Interconnectable Photoelectric Smoke Alarm

BRK 86RACHE10N Mains Powered Interconnectable Smoke Alarm
With Lithium Battery Backup

As the 86RACEN above but the 86RACHE10N features a sealed 10 year lithium battery back up with low battery status indicator and SILENCE BUTTON.

Larger Image...
Price:
£28.55
£33.55 Including VAT at 17.5%

Select this box to order a Mounting Pattress SMK839 for each alarm. Price: £3.32 (£3.90 Including VAT at 17.5%)

Related products:

1. BRK 7010LBE Mains Powered Interconnectable Photoelectric Smoke Alarm

BRK COMPATIBILITY
PLEASE NOTE THAT ALL BRK ALARMS USE THE SAME ELECTRICAL CONNECTOR & ARE COMPATIBLE WITH ALL OTHER MODELS OF BRK ALARMS BOTH PAST & PRESENT

Ionisation or Photoelectric (Optical)?
While all smoke alarms are designed to detect smoke, certain sensing technologies react differently to certain types of fire.

Photoelectric sensing technology is generally more sensitive (than ionization sensing technology) at detecting large particles.
Large particles tend to be produced in greater amounts by shouldering fires. These fires may smoulder for hours before bursting into flames.

Ionization sensing technology is generally more sensitive (than photoelectric sensing technology) at detecting small particles. Small particles tend to be produced in greater amounts by flaming fires. These fires consume combustible materials rapidly and spread quickly.

For optimum protection we recommend the use of both photoelectric and ionization alarms on each level of a house.

BRK 7010BE Mains Powered Interconnectable Photoelectric Smoke Alarm
With Alkaline Battery Backup

The 7010 series of alarms are part of a range that will define the next generation of photoelectric alarms.
Smoke sensing technology has also been improved and the alarms use the new patented ceiling entry smoke system.
Housed in a sleek modern design these alarms will be much in demand.
The 7010BE & 7010LBE both feature a test and silence button and have LED indicators for power and alarm.
The 7010BE has an alkaline battery back-up while the 7010LBE features a sealed lithium battery providing 10 year guaranteed back-up.
For optimum protection we recommend the use of both photoelectric and ionization alarms on each level of a house.

CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

Larger Image...

Price:
£22.20
£26.09 Including VAT at 17.5%

Select this box to order a Mounting Pattress SMK623 for each alarm. Price: £3.32 (£3.90 Including VAT at 17.5%)

Related products:

1. BRK 86RACEN Mains Powered Interconnectable Ionisation Smoke Alarm

BRK COMPATIBILITY
PLEASE NOTE THAT ALL BRK ALARMS USE THE SAME ELECTRICAL CONNECTOR & ARE COMPATIBLE WITH ALL OTHER MODELS OF BRK ALARMS BOTH PAST & PRESENT

BRK 7010LBE Mains Powered Interconnectable Photoelectric Smoke Alarm
With Lithium Battery Backup

The 7010 series of alarms are part of a range that will define the next generation of photoelectric alarms.
Smoke sensing technology has also been improved and the alarms use the new patented ceiling entry smoke system.
Housed in a sleek modern design these alarms will be much in demand.
The 7010BE & 7010LBE both feature a test and silence button and have LED indicators for power and alarm.
The 7010BE has an alkaline battery back-up while the 7010LBE features a sealed lithium battery providing 10 year guaranteed back-up.
For optimum protection we recommend the use of both photoelectric and ionization alarms on each level of a house.

CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

Larger Image...

Price:
£29.96
£35.20 Including VAT at 17.5%

Select this box to order a Mounting Pattress SMK623 for each alarm. Price: £3.32 (£3.90 Including VAT at 17.5%)

Related products:

1. BRK 86RACHE10N Mains Powered Interconnectable Smoke Alarm

Installation Options
With or without pattress

Larger Image...

BRK 6230BFP Mains Powered Interconnectable Heat Alarm
With Alkaline Battery Back Up

PLEASE NOTE THAT THIS HEAT ALARM HAS BEEN REPLACED BY THE DICON 680MBX - SEE BELOW

BRK’s Heat Alarms have been developed for use in places where a smoke detector may not be suitable.
A Heat Alarm gives additional fire warning protection when used in conjunction with a smoke detector system.
BRK’s Heat Alarms can be used in areas where high ambient air temperatures, high humidity, condensation or cooking may cause a smoke detector to be activated falsely.
Ideally Heat Alarms should be used in all kitchen-diners, lofts, garages or boiler rooms.
Building Regulations recognise the importance of Heat Alarms and recommend them to be installed in addition to or as an alternative when smoke alarms are unsuitable.
Heat Alarms could also be considered for integral garages connected to the house via a door. Flammable liquids inside a garage or workshop can be a distinct fire risk and the typically dusty atmosphere would not be a suitable environment for a smoke detector.
BRK’s Heat Alarms should not be used as a replacement for smoke alarms, but can be used in conjunction with or as stand alone fire detection.

BRK’s smoke and heat alarms can be fully integrated into BRK’s Flexipoint mini-system.

LARGER IMAGE & DESIGN AND INSTALLATION INFORMATION
Price:
£30.45
£35.78 Including VAT at 17.5%

BRK COMPATIBILITY
PLEASE NOTE THAT ALL BRK ALARMS USE THE SAME ELECTRICAL CONNECTOR & ARE COMPATIBLE WITH ALL OTHER MODELS OF BRK ALARMS BOTH PAST & PRESENT

BRK 6230B10FP Mains Powered Interconnectable Heat Alarm
With 9Volt Lithium Battery Back Up

PLEASE NOTE THAT THIS HEAT ALARM HAS BEEN REPLACED BY THE DICON 680MRL - SEE BELOW

As the BRK 6230BFP above but with a 10 year lithium battery backup supplied.

LARGER IMAGE & DESIGN AND INSTALLATION INFORMATION
Price:
£34.95
£41.07 Including VAT at 17.5%

Dicon 680MRL Mains Powered Heat Alarm
with Tamperproof Rechargeable Lithium Battery Cells Backup

The Dicon 680MRL 230 volt Heat Alarm with rechargeable lithium battery back up is designed for use in the kitchen. The 10 year rechargeable battery back up provides power to the unit
in the event of a mains failure. Incorporating a thermistor heat sensing element for accuracy and reliability. The 680MRL can be linked with up to 11 compatible smoke and heat alarms,
providing additional protection.

Features

230 volt Mains Powered
Backup with tamper-proof rechargeable lithium cells*
Test Button
Accurate Thermistor Sensing Technology
Multi-alarm Interlink
LED Operating Indicators
Alarm Source Indicator
Push-fit Connection - Easy to Install
Mounting Base Plate
5 Year Guarantee
BS 5446-2:2003
CE

*Lithium cells give reliable back up for at least six months of power out in standby mode. Back up cells have a 10 year life and are environment friendly

Please note that if this heat alarm is being purchased to replace an existing BRK alarm, then the existing electrical connector will need to be replaced with the new connector supplied with the alarm - three wires.
Also the existing mounting plate will need to be replaced with the new one supplied with the alarm - just two screws.
The new mounting plate will fit the existing pattress (SMK623A) if fitted.

Larger Image & Technical Specification...
Price:
£34.65
£40.71 Including VAT at 17.5%

Select this box to order a Mounting Pattress CB232 for each alarm. Price: £3.90 (£4.58 Including VAT at 17.5%)

Dicon 680MBX Mains Powered Heat Alarm
with Alkaline Battery Backup

The Dicon 680MBX 230 volt Heat Alarm with battery back up is designed for use in the kitchen, garage and boiler room. Incorporating a thermistor heat sensing element for accuracy and reliability, the 680MBX can be linked to up to 11 compatible mains smoke and heat alarms, providing additional protection.

Features

230 volt Mains Powered
Test Button
Accurate Thermistor Sensing Technology
Multi-alarm Interlink
LED Operating Indicators
9 volt Battery Included
Alarm Source Indicator
Push-fit Connection - Easy to Install
Mounting Base Plate
5 Year Guarantee (alarm only)
BS 5446-2:2003
CE

Larger Image & Technical Specification...

Price:
£27.41
£32.21 Including VAT at 17.5%

Select this box to order a Mounting Pattress CB232 for each alarm. Price: £3.90 (£4.58 Including VAT at 17.5%)

BRK Electronics 2002 RACEN (RACE) Mains Powered Interconnectable Photoelectric Smoke Alarm

PLEASE NOTE THAT THIS ALARM HAS NOW BEEN SUPERSEDED.
Two Options Available:
Option 1
Replace with BRK 86RACEN - this will fit both your existing ceiling pattress (if fitted) and electrical connector. Please note - the 86RACEN uses an ionisation sensor.
Or
Option 2
Replace with same type of sensor - i.e. Phototelectric - by using the BRK 7010BE. This alarm has a smaller base diameter 131mm (as opposed to 145mm for the 2002) and will need the new ceiling plate (supplied) fitting in place of the existing ceiling plate and if there is a pattress (junction box base) fitted onto the ceiling, the new 7010BE plate will need to be screwed to the existing ceiling plate.
TO PURCHASE EITHER OF THESE REPLACEMENT ALARMS - SEE ABOVE
CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

Larger Image...

BRK 2002RACHE10N Mains Powered Interconnectable Photoelectric Smoke Alarm

PLEASE NOTE THAT THIS ALARM HAS NOW BEEN SUPERSEDED

Two Options Available:

Option 1
Replace with BRK 86RACHE10N - this will fit both your existing ceiling pattress (if fitted) and electrical connector. Please note - the 86RACHE10N uses an ionisation sensor.

Option 2
Replace with same type of sensor - i.e. Phototelectric - by using the BRK 7010LBE. This alarm has a smaller base diameter 131mm (as opposed to 145mm for the 2002) and will need the new ceiling plate (supplied) fitting in place of the existing ceiling plate and if there is a pattress (junction box base) fitted onto the ceiling, the new 7010BE plate will need to be screwed to the existing ceiling plate.

TO PURCHASE EITHER OF THESE REPLACEMENT ALARMS - SEE ABOVE

CLICK HERE TO SEE HOW THE NEW 7010 CAN BE INSTALLED ONTO YOUR EXISTING CEILING PLATE

Larger Image...